2
TABLE OF CONTENTS
Pre-Installation Considerations….………...……...………………………………………………………………..….………..2
Installation Cautions & Warnings………………………………………………………………………………..….....……..…3
Wiring……..……………………....…………………………………………………………………………………...………...3-7
Wiring High-Current Connector…….…………………………………………………………………………....….…..........8-9
Power Door Lock Wiring...…………………………………….…………….……..…………...……………..…..………..10-11
Smart Tachless, Tach Reference, Tach Finder, & Timed Crank Modes…………………..…..………...….…………12-15
Diesel Glow Plug Delay..………………….……………………………...……………………...…..…………..…….………16
Options Programming ………..……………………….……………………………..……………..…….....………...……16-21
Transmitter / Transceiver Programming……………………….……………….……………..………...….…………......….22
2 Vehicle Operation.……………………………….………………………………...…………………….….……..…………23
Troubleshooting “Before You Call” Section……………..…………………………..…………….……….……..….………24
Jumper Pin, Antenna, System Diagram & Data port Diagram………………………………..………….……….……25-28
PRE-INSTALLATION CONSIDERATIONS
BEFORE BEGINNING
, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS
BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION
and determine most suitable locations for all components to be placed. These components
include: the module itself, valet/program button, possible relays, and antenna/receiver (RS1301/3/4DP, 1604TW1 II,1704TW2 II,
1804FM II only, the RS-1300DP II model does not include antenna or remotes.) Allow enough wire to create a service loop with
strain relief, should servicing be required. This will also allow easier access and mounting.
DAMAGE to the CoolStart unit
resulting from incorrect installation or failure to follow guidelines stated in this book will not be
covered under warranty and will be subject to repair or replacement charges.
USE A VOLT OHM METER
to test and locate all connections. Test Lights can damage a vehicle’s computer systems.
ADDITIONAL PARTS
, which are not included with this unit, may be needed for your particular vehicle. These items may include
extra relays or Anti-Theft System Bypass modules.
