17
OPTIONS PROGRAMMING
To Engage Option Programming:
1.
Open hood, If no hood pin switch is installed, then ground the Gray wire. Turn Key to the ON position. Do not start
vehicle
Pink wire must be connected!
2. Press the program Valet button 5 times. Wait for the unit to flash the lights and/or horn honk 5 times.
3. Push the valet program button the number of times that corresponds to the option number desired (1-22X). You
must get a light flash and/or honk after each button press. If the system did not flash the lights and/or honk, then it
did not register your press. Press carefully and do not lose count.
4.
For RS1303/4DP II or 1604TW1 II/1704TW2 II/1804FM II:
When you reach the desired option #, Press button #1
Lock or #2 Unlock to change the option. (Some option numbers use ALL 4 remote buttons to select settings)
5.
For RS-1300/1DP II:
(No Lock button) Tap the brake pedal to toggle through the option values: Tap brake once
(lights flash 1X) Tap the brake pedal again (Lights flash 2X) tap 3 or 4 times for options that have 3 or 4 values.
6. When finished, turn Ignition OFF, close hood (or un-ground Gray wire) and check for changed features.
* = Default Value
Option
#
Option Description
Option Values
Button #1
LOCK
Button #2
UNLOCK
1.
Engine Monitoring
Tach (Engine RPM) or Tachless
Tach
Tachless*
2.
Autolock with RPM/Ignition
ON (RPM/Ignition) or OFF.
ON
* OFF
3.
Door Lock Pulse Time
0.5 Sec. (Standard) OR
3.0 Sec. (European Vacuum)
3 Sec.
* 0.5 Sec.
4.
Double Unlock Pulse
Single or Double Unlock Pulse
Double
* Single
5.
Data Port Protocol
OFA = 1-Way / SL= 2-Way
1-Way
* 2-Way
6.
Double button press for remote
start and Trunk release
ON or OFF
ON
* OFF
7.
Horn Chirps on remote start
ON or OFF
ON
* OFF
8.
Lock During and After
Remote Start Abort
ON or OFF
OFF
* ON
9.
Tan Wire Output function
Trunk or Dome Light Output
Dome
* Trunk
10.
Wake up Pulse on Unlock (1-
sec +12V to IGN)
ON or OFF
ON
* OFF
