background image

BRASS BURNER WARRANTY 

INFORMATION 

This warranty is void if the fire table has been subject to negligence, alteration, misuse, unauthorized      repairs, dings, dents, scratches, or 

incorrect and/or prohibited applications as specified in the owner’s     manual.Natural gas lines must be installed by a licensed plumber only 

or local gas company agent.The original purchaser acknowledges and agrees that this product is a handmade, hand-finished product. Each 

piece is unique. Any samples provided are typical of texture, finish, individual characteristics, and color but they should not be considered 

exact representations of the final product. There can be up to a 15% variation in color and texture from piece to piece. In addition, shape 

detail can vary as much as 1/2” in size. The texture created by entrapped air ranges from smooth to randomly indented. Minor chipping, 

water staining, and non-structural hairline cracks are also traditional characteristics of this product. As with natural stone, color will vary on 

individual orders and among individual pieces in the same order. As with natural stone, excessive heat exposure may cause discoloration. As 

fire tables age, color may lighten or darken according to specific field or storage conditions such as humidity, temperature, and exposure to 

sunlight.

BRASS BURNER 

Full Lifetime Warranty for WARMING TRENDS® Burners. WARMING TRENDS warrants that each WARMING TRENDS Crossfire 

and other jetted-flame-brass-burners (each as “Burner”) is free from defects in materials and workmanship and conforms to its 

specifications, which are available upon request. The warranty period for a Burner is lifetime warranty beginning on the date of purchase 

(“Warranty Period”). This Warranty is transferable, but we reserve the right to require proof of ownership for any transferred burners 

including proof that the Burner was not acquired through improper means or unauthorized re-sellers. During the Warranty Period, 

WARMING TRENDS provides repair and exchange services for the Burners, without charge. If a Burner does not function as warranted 

during the Warranty Period and, after a reasonable number of attempts, WARMING TRENDS is unable to either 1) make it do so or 2) 

replace it with one that is at least functionally equivalent, you may return it to WARMING TRENDS and your money will be refunded. The 

warranty stated above will not apply to the extent that there has been misuse or use contrary to specifications or the appropriate user or 

operating manual, installation defect, accident, modification, unsuitable physical or operating environment, operation in other than the 

specified operating environment (e.g., outdoor burners should only be used outdoors) improper maintenance by you, or failure caused by a 

product for which WARMING TRENDS is not responsible.  With respect to Burners, the warranty is voided by removal or alteration of any 

identification labels or marks on any Burner or part. THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE 

ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

ITEMS NOT COVERED BY WARRANTY

Other than as expressly stated above, WARMING TRENDS does not warrant uninterrupted or error-free operation of any Burner or that 

WARMING TRENDS will correct all defects. Warming Trends does not warranty any services related to our Burners, including installation, 

unless we provided those services to you.  You may have warranty rights from the service provider, but we make no representations or 

warranties express or implied regarding any third party service provider. This warranty also does not apply to any fire logs (including the 

FireStorm® Steel Log) or any of the electronics used in connection with our Burners, which may be covered by separate warranties with 

different terms.

YOUR RIGHTS UNDER STATE LAW

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  You may find this 

information from the Federal Trade Commission helpful in understanding your rights, but we recommend you speak to your attorney 

regarding your specific situation and the laws in your state or jurisdiction.  https://www.consumer.ftc.gov/articles/0252-warranties

 

 

15

User’s Manual

715-293-3101
[email protected]

Summary of Contents for BOWL CFB120LP


























Reviews: