Crestron
TPS-ENET
Ethernet Card for TPS/Tilt Panel
Touchpanel LAN Port (for reference only)
RGB
LAN
NET/VIDEO
24VDC 2.0A
LINK STATUS
LED (GREEN)
ETHERNET
ACTIVITY
LED (YELLOW)
8 1
Industry Compliance
As of the date of manufacture, the TPS-ENET has been tested and found
to comply with specifications for CE marking and standards per EMC
and Radiocommunications Compliance Labelling.
NOTE:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Setup
Installation and Hookup
The TPS-ENET is designed to be installed in a specific expansion slot in
the TPS-5000 and TPS-6000 touchpanels. The tools required for
installation are a grounding strap (or grounded workstation) and a #1
Phillips screwdriver.
CAUTION:
The TPS-ENET and the touchpanel contain electrostatic
discharge sensitive devices (ESDs); observe precautions for handling
ESDs to avoid damaging the card and/or the touchpanel.
Operations & Installation Guide - DOC. 6016
Ethernet Card for TPS/Tilt Panel: TPS-ENET
•
5
