Isys i/O
®
Tilt Touchpanel Media Center
Crestron
TPMC-12
TPMC-CH-IMC Interface Module
For networks without CAT5 audio and video, the TPMC-CH-IMC Interface Module
(as well as a 15 foot “triamese” interface cable) is included to convert unbalanced
video sent over coax cable and balanced/unbalanced audio sent over shielded,
twisted-pair wiring to Crestron Certified Wire for connection to the touchpanel.
NOTE:
The TPMC-CH-IMC is not for use with QuickMedia.
NOTE:
Audio and video wiring between the touchpanel and module may be as long
as 500 feet (152 meters) for component video or 750 feet (229 meters) for composite
and S-video. However, the length of Cresnet cable must account for limits based
upon the touchpanel power requirements. Refer to the latest version of the
TPMC-CH-IMC Interface Module Operations Guide (Doc. 6345) and “Network
Wiring” on page 14.
QM-TX QuickMedia Transmitter
The QM-TX QuickMedia Transmitter (sold separately) can be used to connect a
video or audio source to a QuickMedia network without a locally available QM
transmitter (such as the QM-WMC).
The QM-TX accepts composite video, S-video, component video and audio signals.
These signals are converted to the QuickMedia standard and fed over a CAT5E or
CAT6 cable to a QM receiver (such as the TPMC-12). All signal routing occurs
automatically under the command of the control system.
For more information, refer to the latest version of the QuickMedia Transmitter:
QM-TX Operations Guide (Doc. 6334).
42
•
Isys i/O
®
Tilt Touchpanel Media Center: TPMC-12
Operations Guide – DOC. 6675A
