Isys i/O
®
Tilt Touchpanel Media Center
Crestron
TPMC-12
Display Output
Touching
Display Output
shows the display resolution of the touchpanel and
provides test charts for adjusting skew, peak and boost settings on a remote display.
“Display Output” Window
Select the following
Test Patterns,
in the following order and adjust the display as
necessary.
1.
Vertical Lines
2.
Grid
3.
Color Bars
4.
Grayscale Gradient
5.
Frequency Adjust Test
6.
Streak, Boost and Skew
7.
Full Screen White
Update Panel
The
Update Panel
button permits the selection of the touchpanel program, a .vtz
file. It is also used to upgrade firmware.
The
Project
tab of the “Project and Firmware” window is divided into two sections:
Current Loaded Project
and
Load New Project.
In the
Target Location to Load the Project to
section, you can choose the location
where your uncompressed project files will be stored. The default file location is the
internal flash.
In the
Load New Project
section, touch
Browse
and select the compiled project (i.e.
the .vtz file) to be loaded from a network drive, USB device or flash drive, then
touch
Open
to show the source file in the “Project and Firmware” window. Touch
Load
to uncompress the project file, place it in the destination selected in
Target
Location to Load the Project to
and display it on the touchpanel.
NOTE:
If there is a mapped network drive on the touchpanel, the first time you
select
Browse
, it may take some time for the “Open” window to appear.
24
•
Isys i/O
®
Tilt Touchpanel Media Center: TPMC-12
Operations Guide – DOC. 6675A
