CRESTRON
Operations Guide - DOC. 5729
Slide Controller: SP-SC
••
3
Setup
SP-SC with SmartPresenter
™
Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-SC.
Connect the other end of the cable to one of the outputs on the SP-1. The EBY, five-
pin, pickle type connector should be plugged into the projector.
To assign a Q-Code for the Slide Controller, refer to the latest revision of the
SmartPresenter –
Quick Guide
(DOC. 5742).
NOTE:
An external power supply is not necessary when using the SP-SC with the
SmartPresenter system.
Connect Serial Data Cable to SP-1
Serial Data Cable
To Slide Projector
Serial Data Cable
