CRESTRON
6
••
Slide Controller: SP-SC
Operations Guide - DOC. 5729
Programming
SmartPresenter
™
SP-1
The SmartPresenter is field programmable and does not require a PC. Refer to the
latest revision of the SmartPresenter –
Quick Guide
(DOC. 5742). SmartPresenter
software is available, however, it is only necessary for changing drivers, cloning
SP-1 machines, and updating firmware.
SmarTouch
™
ST-CP
The SmarTouch systems are easily programmed using the SmarTouch STS Wizard.
In several easy steps a SmarTouch system can be programmed and up-loaded. The
STS Wizard is available in VisionTools Pro
™
software.
SmarTouch systems may also be custom programmed using Crestron's easy-to-use
SIMPL
™
Windows
®
and VisionTools Pro
™
software.
CNMSX
The CNMSX is programmed using Crestron's easy-to-use SIMPL
™
Windows
®
software.
Example Program shown as Block Diagram
This example allows a touchpanel to control a slide projector via the IR-Device (SP-
SC). Feedback is provided to alert the touchpanel user that a button is, in fact, being
pressed. The IR Device represents the driver for the SP-SC. This SP-SC driver can
be located in the Crestron Database (version 11.7.207 or later), under Slide
Controllers.
