CRESTRON
4
••
Slide Controller: SP-SC
Operations Guide - DOC. 5729
SP-SC with SmarTouch
™
ST-CP
Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-SC.
Connect the other end of the cable to one of the outputs on the ST-CP. The EBY,
five-pin, pickle type connector should be plugged into the projector.
To program the ST-CP for the Slide Controller, refer to the SmarTouch STS Wizard
included with VisionTools Pro
™
or Crestron's SIMPL
™
Windows
®
programming
software (v 1.20.04 or later) and the latest version of the Crestron Database (v
11.7.207).
NOTE:
An external power supply must be used when using the SP-SC with the
SmarTouch ST-CP system. Refer to "Specifications" on page 2 for part number and
input/output voltage specifications.
Connect Serial Data Cable to ST-CP
To Slide Projector
Serial Data Cable
Serial Data Cable
External
Power Supply
Serial Data Cable
