CRESTRON
4
••
SmartPresenter™: SP-1
Operations Guide - DOC. 5712
Physical Description of the SmartPresenter
There are three SmartPresenters available: SP-1, SPI-1, and SP-1/UK.
Configuration differences depend on the input power requirements and the
communication frequency. The SP-1 requires a 110V external AC power pack and
operates at 433.92 MHz. The SPI-1 requires a 220V external AC power pack and
operates at 433.92 MHz. The SPI-1/UK requires a 220V external AC power pack
and operates at 418 MHz. This configuration is required for operation in the United
Kingdom and alike. For purposes of this Operations Guide, the term SP-1 is used
interchangeably for both configurations, except where noted.
The SP-1, shown after this paragraph, is housed in a black enclosure with silk-
screened labels on the front and rear panels. On the front of the unit there are six
LEDs for indicating the unit’s current status and four buttons for programming the
SP-1 with proper device codes. All the connections, except for the antenna and its
right angle adapter, are made on the back of the unit. Refer to the physical views
shown below. There are four rubber feet on the base of the unit for stability and to
prevent slippage.
SP-1 Physical Views
