Multimedia Presentation System 300
Crestron
MPS-300
•
Press the
k
or
j
buttons until “Front Panel” is displayed on the LCD and
press
ENTER
to display the Front Panel control.
Front Panel Lock Controls
Front Panel Lock:
On
•
Press the
k
or
j
buttons to toggle between On and Off. The current setting
is indicated with an asterisk (*).
•
Press
ENTER
to save the new setting and return to the Control Setup
menu.
Operation
Using the out-of-the-box functionality, the MPS-300 can be operated from the front
panel, an APAD, a 12-button keypad such as the CNX-B12 or the C2N-DB12, or the
C2N-FTB FlipTop Control Center.
Control from the Front Panel
The following describes operation of a system when using the out-of-the-box
functionality and the front panel. If a custom program has been created, the system
may function differently.
Turn On the System
To turn on the system:
1.
Select an output by pressing any of the output buttons:
•
VIDEO
for composite output on
OUTPUT 1
.
•
S-VIDEO
for S-video output on
OUTPUT 2
.
•
YPrPb
for component output on
OUTPUT 3
.
•
RGBHV
for RGB video on
OUTPUT 4
.
•
TOUCHPANEL
for local touchpanel on
OUTPUT
5
(CH or QM).
•
QM OUT 6
for QM signal on
OUTPUT 6
.
•
QM OUT 7
for QM signal on
OUTPUT 7
.
2.
Select any of the source inputs by pressing an input button (
BNC 1
,
BNC 2
,
RGBHV 3
,
BNC 4
,
RGBHV 5
,
QM IN 6
,
QM IN 7
, or
QM IN 8
).
Turn Off the System
To turn off the system, press the
SYS PWR
button twice.
NOTE:
If the projector output was selected (output button 1), the display will
prompt the user to turn off the projector.
76
•
Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B
