12 Inch Tilt/Lectern Touchpanels
Crestron
TPS-4500V & TPS-4500LV
Cover Touchpanel with Bezel
DRYWALL
NOTE:
WIRING NOT SHOWN
FOR CLARITY
COVER
TOUCHPANEL
WITH BEZEL
Touchpanel Removal (TPS-4500LV)
If it is necessary to remove the TPS-4500LV after it has been installed into a
mounting surface, complete the following steps in the order provided to remove the
touchpanel. The only tool required is a #2 Phillips tip screwdriver.
1. Lift the plastic cover off the touchpanel. Do not apply excessive
pressure to the touchscreen.
2. Loosen and remove the screws that secure touchpanel to the mounting
option in use.
3. Using equal pressure, carefully remove the touchpanel from the
opening.
4. If necessary, secure and label the attached cables before disconnecting
them from the back of the touchpanel.
Recommended Cleaning
Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may degrade image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. The faceplate may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath panels.
22
•
12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV
Operations Guide - DOC. 6160
Summary of Contents for Isys TPS-4500LV
Page 4: ......