Wall Mount
Touchpanels
Crestron Isys
®
TPS-12G/15G-QM-L
“IP Table Entry” Window
NOTE
: All IP table entries are set as Master and cannot be changed.
6. In
the
IP Address/Hostname
field, enter the static IP address of the control
system, or if the control system is DHCP-enabled, its fully qualified domain
name. After entering all of the information, click
OK
to add the device to
the IP table.
7. Repeat this procedure for all the control systems that will control the
touchpanel.
8. Click
Save To File…
on the “IP Table” window
to save this IP table to the
PC.
“Save As” Window
9. Once all of the control systems have been listed, click
Send to Device
on
the “IP Table” window
to upload the IP table to the touchpanel. The
touchpanel will reboot and all of the table entries will be listed in black.
NOTE:
When an IP table is sent to the touchpanel, the previously loaded IP table is
overwritten.
¥
Wall Mount Touchpanels: TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
52