Crestron Isys
®
TPS-12G/15G-QM-L
Wall Mount Touchpanels
a list of accessible control systems and network devices. You can establish a
session with any or all of the devices in the address book (provided the PC
has a valid connection to each Cresnet or Ethernet network).
4. Select the device from the Address Book or click
Add Entry
and type a
name for the new device, such as
Touchpanel Direct
.
5. Select
RS232
as the
Connection Type
and select the serial settings of the
device. This sets the PC to the same serial settings. Enter the settings and
click
OK
.
For touchpanels, the default settings are:
•
Port = COM 1
•
Baud Rate = 152000 (or select Auto-Detect)
•
Parity = None
•
Data Bits = 8
•
Stop Bits = 1
•
Hardware Handshaking (RTS/CTS) = Off
•
Software Handshaking (XON/XOFF) = Off
NOTE:
It may be necessary to select
TPS Touch Panel
in the Device Type drop
down. The
Auto-Detect
setting, which is selected by default, may not be appropriate
in some cases.
Crestron Toolbox Address Book Setup
6. Select
Tools | System Info
or click the System Info icon
. Select
Touchpanel Direct
from the drop down list if it is not already selected.
If communication is successful, the “System Info” window displays the
operating system, Cresnet ID, connection parameters, memory usage, and
hardware information.
Operations Guide – DOC. 6356
Wall Mount Touchpanels: TPS-12G/15G-QM-L
¥
47