Wall Mount
Touchpanels
Crestron Isys
®
TPS-12G/15G-QM-L
Exploded view of Mounting the TPS-12G-L in the Optional BB-12L Back Box
Touchpanel Removal
If it is necessary to remove the touchpanel after it has been installed into a mounting
surface, complete the following steps in the order provided to remove the
touchpanel. The only tool required is a #2 Phillips tip screwdriver.
1. Lift the bezel off the touchpanel. Do not apply excessive pressure to the
touchscreen.
2. Loosen and remove the screws that secure touchpanel to the mounting
option in use.
3. Using equal pressure, carefully remove the touchpanel from the opening.
4. If necessary, secure and label the attached cables before disconnecting them
from the back of the touchpanel.
Recommended Cleaning
Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
¥
Wall Mount Touchpanels: TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
34