manualshive.com logo in svg

Crestron HD-MD4X1-4K-E, Supplemental Manual, Page: 25 / 28

Share
Download
Crestron HD-MD4X1-4K-E Supplemental Manual Download Page 25

 

Supplemental Guide – DOC. 7761A 

HD-MD-6X2/4X2/4X1-4K-E:  4K HDMI Switchers 

•

  21 

Using the Routing Push Buttons 

The switchers provide routing push buttons that can be used to route inputs to outputs. 
Routing LEDs indicate the routing status. 

NOTE:  

Both the web interface and the OLED display menu allow the front panel to  

be disabled. If the front panel is disabled, pressing the routing push buttons has no effect.  

(For information about enabling or disabling the front panel by using the web interface, refer 
to “Enabling or Disabling the Front Panel” on page 11. For information about enabling or 
disabling the front panel by using the OLED display, refer to ”Configuring Device Settings” 

on page 20.) 

Routing Inputs on the HD-MD6X2-4K-E and HD-MD4X2-4K-E 

The HD-MD6X2-4K-E provides six INPUT push buttons numbered 1-6, two OUTPUT push 
buttons numbered 1 and 2, and corresponding LEDs. 

Routing Push Buttons and LEDs on the HD-MD6X2-4K-E 

 

The HD-MD4X2-4K-E provides four INPUT push buttons numbered 1-4, two OUTPUT 

push buttons numbered 1 and 2, and corresponding LEDs. 

Routing Push Buttons and LEDs on the HD-MD4X2-4K-E 

 

To route an input to an output on the HD-MD6X2-4K-E or HD-MD4X2-4K-E, press the 
INPUT push button corresponding to the input to be routed, and then press one or both of 

the OUTPUT push buttons as desired.  

NOTE:  

For the HD-MD6X2-4K-E and HD-MD4X2-4K-E, the two OUTPUT buttons can be 

pressed for the selected input if desired. 

When an INPUT push button is pressed, the corresponding INPUT LED indicates whether 
the input is routed. The following table provides information about the INPUT LEDs. 

INPUT LED Colors and Meaning (HD-MD6X2-4K-E and HD-MD4X2-4K-E Only) 

COLOR 

MEANING 

Solid green 

The input is routed to an output. 

Flashing green 

The input is in the pending state and will be routed to an output when the 

desired OUTPUT push button is pressed. If an OUTPUT push button is not 

pressed within 15 seconds, the INPUT LED turns off. 

Amber 

A source is detected but no signal is routed. 

Off 

No source is detected and no signal is routed. 

 

Enter

MENU

HD-MD6X2-4K-E

EXIT

1

2

3

4

5

6

1

2

PWR

INPUT

OUTPUT

BACK

Summary of Contents for HD-MD4X1-4K-E





























Reviews:

No comments