10
•
HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers
Supplemental Guide – DOC. 7761A
Configuring Network Settings
To configure network settings, do the following:
1.
In the navigation bar, click NETWORK. The Network page opens.
Network Page
2.
Configure network settings as required:
•
In the Hostname text box, overwrite the existing hostname with a name
that identifies the switcher on the network. The hostname is restricted to
the letters
a
to
z
(not case sensitive), the digits
1
to
9
, and the hyphen.
The default hostname is HDMD6X2-
xxxxxx
for the HDMD6X2-4K-E,
HDMD4X2-
xxxxxx
for the HD-MD4X2-4K-E, and HDMD4X1-
xxxxxx
for the
HD-MD4X1-4K-E, where
xxxxxx
consists of the last six digits of the MAC
address of the device.
•
Specify whether the IP address of the switcher is to be assigned by a
DHCP (Dynamic Host Configuration Protocol) server. To set the IP address,
click either of the following radio buttons:
o
Obtain an IP address automatically: (Default setting) Allows the
IP address of the switcher to be automatically assigned by a
DHCP server on the local area network (LAN) for a predetermined
period of time.
NOTE
: If a DHCP server does not exist on the network and
45 seconds have elapsed since the switcher was powered on, the
IP address defaults to a link-local address. Refer to RFC 3927 for
information about link-local addressing.
o
Use the following IP address: Allows static IP address, subnet
mask, and default gateway settings to be configured:
•
IP Address: Enter a unique IP address for the switcher.
•
Subnet Mask: Enter the subnet mask that is set on the
network.
•
Default Gateway: Enter the IP address that is to be used
as the network’s gateway.
Summary of Contents for HD-MD4X1-4K-E
Page 4: ......