8
•
HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers
Supplemental Guide – DOC. 7761A
b.
In the Inputs section of the page, configure each input as follows:
NOTE:
For each input, the Sync icon denotes whether a source is
detected at the input. If a source is detected, the icon is green. If no source
is detected, the icon is gray.
i.
In the Name text box, rename the input if desired.
ii.
If an EDID other than the Global EDID is to be assigned, select the
desired EDID in the EDID drop-down list.
iii.
In the HDCP Support drop-down list, select Enabled or Disabled.
The default setting is Enabled.
iv.
Do one of the following:
•
Click Save to save the Name, EDID, and HDCP Support
entries for each corresponding input.
•
Click Revert to go back to the previous settings without
saving the current entries.
•
Click Save All to save all unsaved entries.
To delete a custom EDID file, click the Delete… button in the Global EDID section of the
page. The custom EDID file is deleted from the Send EDID to All inputs drop-down list and
also from each individual EDID drop-down list in the Inputs section of the page.
NOTE:
Only custom EDID files can be deleted. Built-in EDID files cannot be deleted.
Configuring Output Settings
Configuration of output settings includes the selection of an input for routing to an output,
the renaming of an output, and the enabling of HDCP. Information about the connected
display can also be viewed.
To configure output settings, do the following:
1.
In the navigation bar, click OUTPUTS. The Output page opens.
Output Page (HD-MD6X2-4K-E Page Shown)
Summary of Contents for HD-MD4X1-4K-E
Page 4: ......