manualshive.com logo in svg

Crestron HD-MD4X1-4K-E, Supplemental Manual, Page: 17 / 28

Share
Download
Crestron HD-MD4X1-4K-E Supplemental Manual Download Page 17

 

Supplemental Guide – DOC. 7761A 

HD-MD-6X2/4X2/4X1-4K-E:  4K HDMI Switchers 

•

  13 

Upgrading Firmware 

To upgrade firmware of the switcher, do the following: 

1.

 

In the navigation bar, click DEVICE. The Device page, which includes a Firmware 
section, opens. 

Device Page—Firmware 

 

The Firmware section displays the following information about the switcher: 

•

 

Model, which is HD-MD6X2-4K-E, HD-MD4X2-4K-E, or  
HD-MD4X1-4K-E  

•

 

Serial Number 

•

 

Firmware Version 

2.

 

To upgrade the firmware, click the Upload firmware file radio button or the Use 
service port radio button: 

•

 

If the Upload firmware file radio button is selected, do the following: 

a.

 

Click the Browse button. Windows Explorer opens. 

b.

 

Locate and select the desired firmware file (*.bin), and then click 

the Open button. The Browse field displays the firmware filename.  

c.

 

Click the Load button. A prompt appears asking for confirmation 
that the firmware be upgraded. 

d.

 

Click the OK button to upgrade the firmware. 

•

 

If the Use service port radio button is selected, do the following: 

a.

 

Insert a USB mass storage device containing the firmware file into 

the SERVICE port of the switcher. 

b.

 

Click the Load button. A prompt appears asking for confirmation 

that the firmware be upgraded. 

c.

 

Click the OK button to upgrade the firmware. 

 

 

 

 

Summary of Contents for HD-MD4X1-4K-E





























Reviews:

No comments