manualshive.com logo in svg

Crestron HD-MD4X1-4K-E, Supplemental Manual, Page: 24 / 28

Share
Download
Crestron HD-MD4X1-4K-E Supplemental Manual Download Page 24

 

20  

•

  HD-MD-6X2/4X2/4X1-4K-E:  4K HDMI Switchers 

Supplemental Guide – DOC. 7761A 

Configuring Device Settings 

To configure device settings, do the following: On the main menu, select Device.  
The Device Status and Configuration submenu opens. 

Device Status and Configuration Submenu 

< Device > 
Details 

Available selections are as follows: 

Details 
Front Panel 
Firmware Update 

Restore 

Items on the Device Status and Configuration submenu are listed in the following table. 
Refer to the table for configuration guidelines. 

Device Status and Configuration Submenu Guidelines 

SUBMENU 

ITEM 

 

GUIDELINES 

Details 

(Read Only) Display the following information about the switcher: 

•

 

S/N:  Specifies the serial number of the switcher 

•

 

FW Ver.:  Specifies the firmware version of the switcher 

Front Panel 

Controls the information that appears on the OLED display or disables the 

OLED display and all controls on the switcher. Select one of the following: 

•

 

Show IP Address:  (Default setting) Allows the IP address of the switcher 

to be shown on the OLED display 

•

 

Show Video Routing:  Allows the route for each output to be shown on 

the OLED display 

•

 

Disable:  Disables the OLED display, navigation pad, push buttons, and 
LEDs on the switcher. Although the front panel is set to Disable, the 

device continues to function. 
NOTE:  To enable the OLED display, navigation pad, push buttons, and 

LEDs, press and hold the INPUT 1 push button for 3 seconds. 

An asterisk precedes the current setting. 

Firmware Update 

When selected, a prompt appears asking for confirmation that the firmware be 

updated. Select Yes or No. If Yes is selected and a USB mass storage device 
is not inserted into the SERVICE port of the switcher, the Insert USB drive 

message appears on the OLED display. To update the firmware, insert a USB 
mass storage device containing the updated firmware file into the SERVICE 

port.  

Restore 

When selected, a prompt appears asking for confirmation that the default 

settings be restored. Select Yes or No. If Yes is selected, the Restoring… 

message appears followed by the Restoring … Complete message. 

 

 

Summary of Contents for HD-MD4X1-4K-E





























Reviews:

No comments