Password Screen
3.
Use the Nav Pad to enter the password.
o
To select a number, press up or down on the Nav Pad.
o
To move the cursor left or right, press left or right on the Nav Pad.
When the password is displayed, move the cursor to the rightmost digit, and then
press the center button of the Nav Pad. The Installer menu is displayed.
NOTE:
The default password is 0000. For instructions on changing the password,
refer to “Password” on page 16.
Installer Menu
The Installer menu is divided into four sections:
•
Inputs sets the name and compensation level of each input.
•
Outputs sets the audio parameters for the theater and downmix outputs.
•
Network configures and displays the HD-XSPA’s Ethernet settings.
•
Control configures and displays the HD-XSPA’s front panel settings.
Exit the Installer Menu
To exit the Installer menu, press HOME.
Configure the Inputs
The name and compensation level for each input are set from the Inputs section of the
Installer menu. Perform the following to configure an input:
1.
Open the Installer menu as described in “Open the Installer Menu” on page 4.
2.
Press up or down on the Nav Pad to highlight Inputs, and then press the center
button of the Nav Pad. The Inputs menu is displayed.
Password
[0]000
Installer
Inputs
Outputs
Network
Control
Supplemental Guide – DOC. 7448E
HD(I)-XSPA: 4K UHD Surround Sound AV Receiver
•
5
Summary of Contents for HD(I)-XSPA
Page 4: ......