background image

 

 

 

 

 
 
 

The product warranty can be found at 

www.crestron.com/warranty

. 

 

The specific patents that cover Crestron products are listed at 

patents.crestron.com

. 

 

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 

7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered 

trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.  

 

Manufactured under license from Dolby Laboratories. 

 

Crestron, the Crestron logo, Crestron Studio, Crestron Toolbox, DigitalMedia, and DM are either trademarks or registered trademarks of 

Crestron Electronics, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered 

trademarks of HDMI Licensing, LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names 

may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any 

proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

 

 

This document was written by the Technical Publications department at Crestron. 

©2015 Crestron Electronics, Inc. 

 

Summary of Contents for HD(I)-XSPA





























Reviews: