3.
Remove the fuse from the fuse holder and insert a new fuse.
CAUTION:
Use only the type of fuse specified in the table below. Failure to do so
may cause damage to the HD-XSPA.
NOTE:
One spare fuse is included.
MODEL
REQUIRED FUSE TYPE
HD-XSPA
(US/North America)
T10AH (1/4” x 1 1/4”, 250 V, 10 A, time-lag, high-rupture
rated)
HDI-XSPA
(International/220-240 Vac)
T5AH (1/4” x 1 1/4”, 250 V, 5 A, time-lag, high-rupture
rated)
4.
Insert the fuse holder into the HD-XSPA.
5.
Push in the fuse holder with a flat-head screwdriver while turning the screwdriver
clockwise until the fuse holder sets further into the HD-XSPA.
6.
Push in the fuse holder a little further, and then turn the screwdriver clockwise until
the fuse holder locks into place.
7.
Plug in the HD-XSPA.
Configuration
The HD-XSPA can be configured with the front panel controls or with Crestron Toolbox
™
.
For details on using Crestron Toolbox, please refer to the Crestron Toolbox help file.
Using the Installer Menu
The Installer menu is used to configure the HD-XSPA.
Open the Installer Menu
To configure the HD-XSPA using the front panel controls, the Installer menu must be
displayed. Perform the following to open the Installer menu:
1.
Press HOME to display the Crestron HD-XSPA screen.
Crestron HD-XSPA Screen
2.
Press BACK to display the Password screen.
Crestron
HD-XSPA
4
•
HD(I)-XSPA: 4K UHD Surround Sound AV Receiver
Supplemental Guide – DOC. 7448E
Summary of Contents for HD(I)-XSPA
Page 4: ......
