DualTouch™ Technology Touchpanel
Crestron
DTT-18
Hardware Hookup
Refer to the following diagram and complete the connections as needed in any order.
NOTE
: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
Consideration must be given if installed in a closed or multi-unit rack assembly since
the operating ambient temperature of the rack environment may be greater than the
room ambient. Contact with thermal insulating materials should be avoided on all
sides of the unit.
NOTE:
The maximum continuous current from equipment under any external load
conditions shall not exceed a current limit that is suitable for the minimum wire
gauge used in interconnecting cables. The ratings on the connecting unit's supply
input should be considered to prevent overloading the wiring.
Hookup Connections for the DTT-18
Power
Supply
DTT-18
UPX-2
DVI/RGB
Adaptor
to RGB
Output Port A
DB9
(Not
Connected)
USB
Connector
to any
USB port
DVI/I RGB
Connector
Power
Connector
VGA/DVI Switch Must Be
in the VGA Position
Operations Guide – DOC. 6290
DualTouch™ Technology Touchpanel: DTT-18
•
11
