Crestron
DM-TX-200-C-2G
DigitalMedia 8G+™ Transmitter 200
Keyboard/Mouse Extender
The DM-TX-200-C-2G functions as a keyboard/mouse extender, allowing a USB
HID-compliant keyboard and/or mouse at the wall plate location to control a
computer or other host device located at the central equipment rack or some other
location.
EDID Format Management
The DM-TX-200-C-2G allows for management of the EDID (Extended Display
Identification Data) information that passes between the display devices and input
sources in the system. Using Crestron Toolbox™ software, the format and resolution
capabilities of each device can be assessed and managed through the
DM-TX-200-C-2G, ensuring reliable operation by instructing sources to output only
the resolutions and formats that can be handled by the displays and system wiring.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control
desired for a seamless user experience. DigitalMedia provides an alternative to
conventional IR and RS-232 device control by harnessing the CEC (Consumer
Electronics Control) signal embedded in HDMI. Through its connection to the
control system, the DM-TX-200-C-2G provides a gateway for controlling the
connected source device through the HDMI connection, potentially eliminating the
need for any dedicated control wires or IR probes. Through proper CEC signal
management, DigitalMedia allows you to take control of each device in the system
as you like.
Simple Electrical Box Mounting
The DM-TX-200-C-2G is designed to fit a 2-gang electrical box or plaster ring (each
not included). It also fits a 2-gang opening in a typical 6 inch (153 mm) deep floor
box (not included). A DM cable connects to the rear of the transmitter via a shielded
RJ-45 DM port. The unit can be powered using the included wall mount power pack
or via Power over DM (PoDM) for a true one-wire solution.* An array of indicators
on the front of the DM-TX-200-C-2G provides for easy setup and troubleshooting.
Advanced configuration is enabled through Crestron Toolbox software.
* PoDM requires connection to a DM 8G+ PoDM power sourcing device.
Operations & Installation Guide – DOC. 7320A
DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G
•
3
