Crestron
DM-TX-200-C-2G
DigitalMedia 8G+™ Transmitter 200
USB Communication via DM Switcher
USB
DM Switcher
DM 8G+
PC Running
Crestron Toolbox
DM-TX-200-C-2G
To establish USB communication between the PC and the DM-TX-200-C-2G via a
DM switcher:
1.
Use the Address Book in Crestron Toolbox to create an entry using the
expected communication protocol (USB). When multiple USB devices are
connected, identify the DM switcher by entering “DM-MD8X8”,
“DM-MD16X16”, or “DM-MD32X32” in the
Model
textbox, the unit’s
serial number in the
Serial
textbox ,or the unit’s hostname in the
Hostname
textbox. The hostname can be found in the “System Info” window in the
section marked
Ethernet
; however, communication must be established in
order to see this information in the “System Info” window.
2.
Display the “System Info” window of the DM-TX-200-C-2G (click the
icon); communications are confirmed when the device information is
displayed.
Via DM 8G+ Receiver/
Room Controller
TCP/IP Communication via DM 8G+ Receiver/Room Controller
LAN
PC Running
Crestron Toolbox
DM 8G+ Receiver/
Room Controller
DM 8G+
DM-TX-200-C-2G
To establish TCP/IP communication between the PC and the DM-TX-200-C-2G via
a DM 8G+ receiver/room controller:
1.
Confirm Ethernet connection between DM 8G+ receiver/room controller
and PC.
2.
Use the Device Discovery Tool in Crestron Toolbox to find the IP address
of the DM-TX-200-C-2G. The tool is available in Toolbox version 1.15.143
or later.
NOTE:
When the DM-TX-200-C-2G is used in a standalone configuration
(i.e., without a DM switcher), DHCP is enabled by default. If desired, a
default IP address (192.168.1.239) can be assigned by holding down its
SETUP
button while applying power. This IP address overwrites any
previous settings and remains until it is changed.
3.
Use the Address Book in Crestron Toolbox to create an entry for the
DM-TX-200-C-2G using the
TCP
connection type, and enter the IP address
of the DM-TX-200-C-2G.
4.
Display the “System Info” window of the DM-TX-200-C-2G (click the
icon); communications are confirmed when the device information is
displayed.
Operations & Installation Guide – DOC. 7320A
DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G
•
23
