DigitalMedia 8G+™ Transmitter 200
Crestron
DM-TX-200-C-2G
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 PWR
LED (1) Green LED, indicates operating power
supplied via PoDM or power pack
2
RESET
(1) Miniature recessed push button for
hardware reset
3
AUDIO IN
(1) 3.5 mm TRS mini phone jack;
Unbalanced stereo line level audio input;
Input Impedance: 10k Ohms;
Input Level: 2 V
rms
maximum
4
SETUP
(Button and LED)
(1) Miniature recessed push button for
Ethernet auto-discovery and (1) red LED
5
8G LINK LED
(1) Green LED, indicates DM link status
6
USB HID
(1) USB Type A female;
USB 2.0 host port for connection of a
mouse/keyboard or other USB HID-compliant
device
7
8G ACTV LED
(1) Yellow LED;
Solid yellow LED indicates HDCP video;
Blinking yellow LED indicates non-HDCP
video
8
HDMI IN
(1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
Also supports DVI and DisplayPort
Multimode
1
9 HDMI
LED (1) Green LED, indicates HDMI input is
selected
10
PC LED
(1) Green LED, indicates PC input is
selected
11 PC
IN
(1) DB15HD female;
RGB (VGA), component, S-video, or
composite video input
2, 3
;
Formats: RGBHV, RGBS, RG
s
B, YP
b
P
r,
Y/C,
NTSC, PAL;
Input Levels: 0.5 to 1.5 V
p-p
with built-in DC
restoration;
Input Impedance: 75 Ohms;
Sync Input Type: Autodetect RGBHV, RGBS,
RG
s
B, YP
b
P
r
;
Sync Input Level: 3 to 5 V
p-p
;
Sync Input Impedance: 1k Ohms
12
G
(1) 6-32 screw, chassis ground lug
(Continued on following page)
12
•
DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G
Operations & Installation Guide – DOC. 7320A
