Crestron
DM-TX-200-C-2G
DigitalMedia 8G+™ Transmitter 200
Wall Plate DigitalMedia 8G+™
Transmitter 200:
DM-TX-200-C-2G
Introduction
The DM-TX-200-C-2G is a DM 8G+™ transmitter and switcher that installs in a
2-gang electrical box (not included) to provide a convenient interface for computers
and high-definition AV sources as part of a complete DigitalMedia™ system. With
both HDMI
®
and RGB inputs, the DM-TX-200-C-2G is ideal for wall, lectern, and
floor box applications in a boardroom, classroom, auditorium, or residence to
provide an input for a laptop computer or similar source. It connects to the head end
or display location using a single CAT5e or Crestron
®
DM 8G
®
cable.
Features and Functions
•
DigitalMedia 8G+™ transmitter and multimedia interface
•
Built-in 2x1 AV switcher
•
DM 8G+ output supports up to 330 foot (100 meter) cable length
1
•
2-gang electrical box mount design
•
Also fits in a typical 6 inch (153 mm) deep floor box (not included)
•
Available colors include black or white
•
Provides HDMI and RGB/component video inputs
2
•
Supports DVI and DisplayPort Multimode sources
3
•
Includes mini-TRS stereo audio input
•
Provides onboard auto-switching capability
•
Includes USB HID (human interface device) keyboard/mouse port
•
Powered over the DM
®
connection or local power pack (included)
4
(Continued on following page)
1.
For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G™ cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia
D cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended
to safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. The manuals are available from the Crestron Web site at
. All cable sold separately.
2.
The RGB input can accept component, composite, and S-video signals via direct interface to Crestron
MPS Series products, or through an appropriate adapter (not included). Input sync detection is not
provided for composite or S-video signal types through the RGB connection.
3.
HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cable sold separately.
4.
Power over DM (PoDM) requires connection to a DM 8G+ PoDM power sourcing device.
Operations & Installation Guide – DOC. 7320A
DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G
•
1
