Crestron
DM-RMC-200-S/S2
DigitalMedia 8G Fiber Receiver 200
DigitalMedia 8G Fiber Receiver
& Room Controller 200:
DM-RMC-200-S/DM-RMC-200-S2
Introduction
The DM-RMC-200-S/DM-RMC-200-S2, hereinafter referred to simply as the DM
®
receiver unless otherwise indicated, provides an advanced one-box interface solution
for a single display device as part of a complete Crestron
®
DigitalMedia™ system.
It functions as a DM 8G
®
(DM-RMC-200-S)/DM 8G SM (DM-RMC-200-S2) fiber
receiver, video scaler, audio amplifier, and control interface, providing a single
HDMI
®
output along with speaker and line level audio plus Ethernet, USB HID, and
a variety of control ports. Built-in scaling enables the connected display to handle
virtually any video signal. A compact, low-profile design allows the DM receiver to
be installed discreetly behind a flat panel display or above a ceiling mounted
projector. It connects to the head end or source location using one multimode
(DM-RMC-200-S) or single-mode (DM-RMC-200-S2) fiber strand.
1
Features and Functions
DigitalMedia 8G™ multimode (DM-RMC-200-S)/single-mode
(DM-RMC-200-S2) fiber receiver, high-definition scaler, audio
amplifier, and display controller
DM 8G fiber input supports up to 1000 foot (~300 meter) cable length
(DM-RMC-200-S)
1
DM 8G SM fiber input supports up to 7.5 miles (12 km) cable length
(DM-RMC-200-S2)
1
Connects to a DM switcher or transmitter (each sold separately) over one
multimode (DM-RMC-200-S)/single-mode (DM-RMC-200-S2)
fiber strand
1
Provides one HDMI or DVI display output
2
Accepts any video source from standard NTSC 480i or PAL 576i to
HD 1080p60 with Deep Color
(Continued on following page)
1.
For DM 8G wiring, the maximum DigitalMedia 8G fiber cable length is 1000 feet (~300 meters)
using CRESFIBER8G fiber optic cable, or 500 feet (~150 meters) using standard CRESFIBER,
CRESFIBER-SINGLE-SC, or generic OM3 simplex multimode fiber optic cable. For DM 8G SMF
wiring up to 7.5 miles (12 km) between devices, use Crestron CRESFIBER8G-SM or generic
G.652.D (or better) single-mode fiber optic cable. Refer to the latest version of the Crestron
DigitalMedia Design Guide (Doc. 4546) for complete system design guidelines. The manual is
available from the Crestron Web site at
. All wire and cables sold
separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cable sold separately.
Operations & Installation Guide – DOC. 7246B
DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2
1
