DigitalMedia 8G Fiber Receiver 200
Crestron
DM-RMC-200-S/S2
DM-RMC-200-S/DM-RMC-200-S2 Connectors, Controls & Indicators (Rear Panel)
20
19
21
22
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 PWR
LED (1) Green LED, indicates operating
power supplied from local power pack
2
DM LINK LED
(1) Green LED, indicates DM link status
3 VIDEO
LED (1) Green LED, indicates video signal
presence and lock status
4
USB HID LED
(1) Green LED, indicates a valid device
connection and activity on the USB HID
port
5
SETUP
(LED and Button)
(1) Red LED and (1) miniature recessed
push button for Ethernet setup
6
RESET
(1) Miniature recessed push button for
hardware reset
7
AUDIO OUT R, L
(Speaker)
2
(2) 2-pin 5 mm detachable terminal
blocks;
Left and right speaker level audio
outputs;
Paralleled with rear panel
AUDIO OUT
connectors;
Wire Size: Connector accepts 12 AWG
maximum;
Output Power: 15 watts per channel at
8 ohms
(Continued on following page)
14
DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2
Operations & Installation Guide – DOC. 7246B
