Crestron
DM-RMC-200-S/S2
DigitalMedia 8G Fiber Receiver 200
Mounting the DM-RMC-200-S/DM-RMC-200-S2
Screws (4)
#06-32 x 1/4”
(2007215)
Screws (4)
#06-32 x 3/4”
(2009211)
Standoffs (4)
#06-32 x 1-1/4”
(2007056)
Mounting
Bracket
(2032478)
2-Gang
Electrical Box
(Not Included)
Installing the Power Pack
The included mounting bracket (2032478), which is used to attach the DM receiver
to an electrical box (not included), provides a holder for the included power pack
(2022484). To install the power pack, perform the following steps (refer to the
illustration on the following page):
1.
Slide the power pack (2022484) into the holder.
2.
Using the two included 06-32 x 1” Phillips head screws (2007250), thread
the screws through the two holes on the front of the power pack holder to
hold the power pack in place.
3.
Using the two included tie wraps (2013608), thread a tie wrap through the
hole on the top and bottom of the holder, and then fasten the tie wraps to the
power pack cable.
Operations & Installation Guide – DOC. 7246B
DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2
19
