Web Interface Configuration Guide — Doc. 8874D
DM-NVX-D30/E30(C) • 15
Configure the date and time settings of the DM-NVX-D30/E30(C) in the Configure Date/Time
section of the screen.
1. Move the Time Synchronization slider to the desired position to specify whether time
synchronization will be enabled or disabled. By default, time synchronization is enabled.
2. In the Time Server field, enter the URL of the NTP or SNTP server.
3. Click Synchronize Now to perform time synchronization between the device's internal
clock and the time server.
4. Click on the Time Zone drop-down to select the applicable time zone.
5. In the Time (24hr Format) field, enter current time in 24-hour format.
6. In the Date field, enter the current date.
Settings Page - Discovery Config
Move the Discovery Agent slider to enabled or disabled to specify if the DM-NVX-D30/E30(C) is
discoverable or not. When Discovery Agent is enabled, the DM-NVX-D30/E30(C) is displayed in
the Available Streams list of other receivers.
If you would like to use a custom TTL value, select the Custom TTL option and then enter the
value in the TTL field.
Settings Page - Control System
1. Toggle Encrypt Connection to specify whether to use encryption. By default, Encrypt
Connection is disabled.
Note that when encryption is enabled, the Control System Username and Control System
Password fields are displayed to provide login information.
2. Enter the Room ID in the Room ID field.
3. Select the IP ID of the DM-NVX-D30/E30(C) in the IP ID drop-down list. Valid values range
