*
Denotes new or updated firmware/software compared to PUF 3.01.32.
2.63.02
Date: 2018-08-21
File name
digitalmedia_2.63.02.puf
Issues Fixed
•
Fixed issue where sporadically video may not pass through local HDMI output on the DMC-4KZ-C/-
DSP, DMC-4KZ-CO-HD, DM-TX-4KZ-302/202-C or DM-RMC-4KZ-100-C. This was observed in Crestron
Production test with very low reproduction rate, 1 in 1000 products tested.
Known Issues
•
When NVIDIA Quadro P2000 connected as DP input source, DM-TX-4KZ-302-C may sporadically fail
to output video after DM-TX-4KZ-302-C power cycles.
•
TT-100 “Connect It” indicators don’t work when connected to USB HID port of the DM-TX-4KZ-
302/202-C, instead use COMPUTER port on the TX if necessary.
•
DM-TX-4KZ-302/202-C may report incorrect input audio sampling frequency for non PCM audio
formats.
•
Audio_Format_fb
,
Audio_Channel_fb and Audio_Sampling_Freq_fb
joins don’t work for DMCI-DMC-
4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbols.
•
When switching upstream, 4K/4KZ outputs may have double audio lock with certain LG/Samsung
Blu-Ray players.
•
When HDR source is routed to DMC-4K-HDO output card, instead of no video it may output bad
video depending on I/O signal video resolution. DMC-4K-HDO output card doesn’t support HDR.
•
DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
•
DMC-4KZ-HD(-DSP) input card setup with DM default 4k 60Hz 2CH/HBR EDID may produce unstable
video when connected to certain streaming or Blu-ray players.
•
Assigning Global EDID via DM Tool to fully populated DM-MD32x32 chassis may report false failures.
Instead assign input EDIDs in batches; 16 inputs at once.
•
The DMC-STR may report a resolution of 0x0@0 when streaming from certain third-party IP cameras.
•
Apple keyboard does not connect reliably to RMCs.
•
All TXs (except TX-401-XX): HDMI audio unreliable with 480i video. All other resolutions are ok.
•
On streaming cards, support for elapsed seconds, bitrate and initiator feedbacks have been removed
to work around Toolbox™ stability issues.
•
Streaming unsupported audio formats (
e.g.
, G.711) can cause the DMC-STR to lock up. Use AAC
audio.
•
Network problems can sometimes cause the DMC-STR to stop decoding a stream. Stop and restart
the stream to recover.
digitalmedia_2.63.02.puf
detailed release notes.
2.63.00
Date: 2018-06-08
File name
digitalmedia_2.63.00.puf
New Features
•
Added support for 4K60 4:4:4 HDR input cards and endpoints. Following devices are now supported:
o
DMC-4KZ-C
o
DMC-4KZ-C-DSP
o
DM-TX-4KZ-302-C
o
DM-TX-4KZ-202-C
Issues Fixed
•
DM-RMC-4KZ-100-C doesn’t work with HD-WP-4K-401-C.
