*
Denotes new or updated firmware/software compared to PUF 3.01.32.
DMC-VID4
Security camera
composite input card
Main application
1.1498.00021
69
DMC-F
DMC-F-DSP
Fiber input card
Main application
1.2456.00045
69
FPGA
58
DSP
3.4.5
DMC-FO-HD
Fiber output card
Main application
1.1498.00021
69
DMC-CAT
DMC-CAT-DSP
CAT input card
Main application
1.2456.00031
69
FPGA
60
DSP
3.4.5
DMC-CATO-HD
CAT output card
Main application
1.1498.00021
69
FPGA
39
Notes and Recommendations
DigitalMedia™ PUF 3.01.37 is maintenance bug fix release.
DigitalMedia™ PNM rules apply. In short:
•
You must never connect a DigitalMedia™ endpoint courtesy LAN port to your LAN.
•
You must connect each DigitalMedia™ switch to your LAN.
•
“SystemID” must be unique for each DigitalMedia™ switch that is part of your cascaded DM network.
Important Note for DigitalMedia™ switchers with DMC-CPU3:
1)
PNM is always enabled, cannot be set to disabled.
2)
Out of the box Ethernet traffic is disabled between cascaded DM links. USB signal routing across
cascades will not work. To enable Ethernet traffic between cascades:
a.
Change the “SystemID” to value other than 1, or
b.
At the DM-MD8x8/16x16/32x32-CPU3(-RPS) Crestron Toolbox™ Text Console, type:
DMSAFECASCADE OFF
3)
Reboot DM-MD8x8/16x16/32x32(-RPS) after “SystemID” change when cascaded to DM-
MD8x8/16x16/32x32-CPU3(-RPS).
4)
Upgrading existing DM-MD8x8/16x16/32x32(-RPS) switcher with 3-series DMC-CPU3 card will set all
the switcher settings (EDID, HDCP settings, Audio settings etc.) to factory defaults. Reconfiguration
of all the settings will be required via either Crestron Toolbox™ based DM Tool or user program.
5)
The DigitalMedia™ cards and endpoints must use the latest firmware, included in the PUF v3.00.24
or higher.
6)
BETACLEANUP/RESTORE is required when 3-series DMC-CPU3 card is removed from one switcher
type and installed in different switcher type (8x8, 16x16, and 32x32).
7)
To achieve optimized upgrade experience, close DM Tool connection to DM-MD8x8/16x16/32x32-
CPU3(-RPS) switcher prior to initiating firmware upgrade via web-based XPanel configuration tool or
Crestron XiO Cloud™.
Important Note:
Please be aware of the following before upgrading/downgrading:
1)
Special steps must be taken to downgrade DM-MD32x32 DMC-CPU card from DM PUF 2.50 or later
to PUF 2.48 or prior. Please see Crestron OLH ID 1285 for details. Other DM products are unaffected.
2)
Several DigitalMedia™ cards have larger firmware files and can take longer to upgrade than other
DM products:
a.
DM-STR: Up to 30 minutes per group of 4 cards.
