*
Denotes new or updated firmware/software compared to PUF 3.01.32.
•
When NVIDIA Quadro P2000 connected as DP input source, DM-TX-4KZ-302-C may sporadically fail
to output video after DM-TX-4KZ-302-C power cycles.
•
DM-TX-4KZ-302/202-C may report incorrect input audio sampling frequency for non PCM audio
formats.
Known Issues
•
DM-MD8x8/16x16/32x32-CPU3(-RPS) doesn’t support connecting LAN port and Content LAN port to
the same subnet.
•
Vertical bezel compensation value set from the DM Tool doesn’t persist across reboot for DM-RMC-
4KZ-SCALER-C, instead set the value programmatically when desired.
•
When routing same input to more than 8 DMC-4KZ-HDO outputs in DM-MD16x16/32x32-CPU3(-
RPS), sporadically some outputs don’t have freeze-frame switching.
•
When Audio Breakaway is enabled, DM-MD32x32-CPU3 switcher may take additional 15-20 seconds
for audio to recover compared to video post reboot.
•
Routing an input to all outputs in DM-MD32x32-CPU3 switcher may observe audio double lock
during switching on DMC-4K-HDO and DMC-4KZ-HDO outputs.
•
DM-MD8x8/16x16/32x32-CPU3(-RPS) web-based XPanel configuration tool doesn’t have redundant
power supply status.
•
DM-TX-4KZ-302-C DisplayPort input doesn’t work reliably with USB-C to DisplayPort cables and
adapters.
•
TT-100 “Connect It” indicators don’t work when connected to USB HID port of the DM-TX-4KZ-
302/202-C, instead use COMPUTER port on the TX if necessary.
•
Audio_Format_fb
,
Audio_Channel_fb and Audio_Sampling_Freq_fb
joins don’t work for DMCI-DMC-
4KZ-C/-DSP and DMCI-DMC-4KZ-HD/-DSP symbols.
•
When switching upstream, 4K/4KZ outputs may have double audio lock with certain LG/Samsung
Blu-Ray players.
•
When HDR source is routed to DMC-4K-HDO output card, instead of no video it may output bad
video depending on I/O signal video resolution. DMC-4K-HDO output card doesn’t support HDR.
•
DMC-4K/4KZ-DSP input cards do not down-mix DTS:X or Dolby Atmos audio to PCM 2ch audio.
•
DMC-4KZ-HD(-DSP) input card setup with DM default 4k 60Hz 2CH/HBR EDID may produce unstable
video when connected to certain streaming or Blu-ray players.
•
Assigning Global EDID via DM Tool to fully populated DM-MD32x32 chassis may report false failures.
Instead assign input EDIDs in batches; 16 inputs at once.
•
The DMC-STR may report a resolution of 0x0@0 when streaming from certain third-party IP cameras.
•
Apple keyboard does not connect reliably to RMCs.
•
All TXs (except TX-401-XX): HDMI audio unreliable with 480i video. All other resolutions are ok.
•
On streaming cards, support for elapsed seconds, bitrate and initiator feedbacks have been removed
to work around Crestron Toolbox™ stability issues.
•
Streaming unsupported audio formats (
e.g.
, G.711) can cause the DMC-STR to lock up. Use AAC
audio.
•
Network problems can sometimes cause the DMC-STR to stop decoding a stream. Stop and restart
the stream to recover.
digitalmedia_3.01.32.puf
detailed release notes.
3.00.26
Date: 2019-03-01
File name
digitalmedia_3.00.26.puf
Issues Fixed
•
Fixed issue where sporadically DigitalMedia™ input/output cards lose communication to 3-series
CPU card. DigitalMedia™ switcher will require reboot to recover.
