manualshive.com logo in svg

Crestron Crestron Isys TPS 6000L, Operation Manual, Page: 32 / 52

Share
Download
Crestron Crestron Isys TPS 6000L Operation Manual Download Page 32

15 Inch Lectern Touchpanel 

 

Crestron Isys™ 

TPS-6000L

 

Appendix A: WAV File Audio Messages 

The TPS-6000L touchpanel is capable of playing audio messages as system prompts 
and responses. These files are recorded as WAV files on a PC using an audio utility 
such as Sound Recorder that is packaged with Microsoft Windows 95/98/NT™. Files 
from other sources may also be converted to an acceptable format by using this or a 
similar utility. Many other audio utilities are available commercially or as shareware.  

The TPS-6000L touchpanel only accepts the following WAV file formats: 

• 

PCM 

• 

8000, 11025, 16000, 22050, and 44100 Hz 

• 

8 and 16 Bit  

• 

Mono and Stereo 

NOTE:

  If the Sound Recorder program is not available on the PC, select

 Start | 

Help

 at the Windows taskbar. Click on the 

Index

 tab and type in 

Sound Recorder

. 

For Windows 95/NT, double-click the 

installing

 entry. For Windows 95/98/NT, 

follow the directions provided to add the Sound Recorder program. (The Sound 
Recorder is part of the 

Multimedia

 component). The Windows

 install CD is 

required.  

This section mentions the location of the Crestron pre-recorded files and contains 
descriptions as well as procedures on how to use Sound Recorder to record, edit, and 
convert WAV file messages. For more information about how to use Sound 
Recorder, refer to its User’s Guide and extensive help information provided with the 
software. The last section of this appendix describes how to use VT Pro-e to attach 
WAV files to a touchpanel project.  

Downloadable WAV Files 

Pre-recorded WAV files for voice prompts and responses are available from 
Crestron. These files can be stored into and programmed for use in the touchpanel 
directly or may be edited with the Sound Recorder. For example, the individual files 
can be combined to create custom messages. "To Create WAV Messages from 
Individual Files" on page 31 describes how to create custom messages. 

NOTE:

  WAV files (formatted specifically for the TPS-6000L touchpanel) can be 

obtained from the Downloads page (WAV_ISYS Library) of the Crestron website 
(

www.crestron.com)

. New users are required to register in order to obtain access to 

the FTP site.  
These WAV files are different than those made available for other Crestron products. 
Be sure to use only those WAV files designated for the TPS-6000L touchpanel.  

28  

•

  15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L 

Operations Guide - DOC. 5825 

Summary of Contents for Crestron Isys TPS 6000L





















































Reviews:

No comments