Crestron Isys™
TPS-6000L
15 Inch Lectern Touchpanel
If you proceed to calibrate the touchpanel, the screen prompts you with the message
"Touch Upper Left +" nearly centered on the display. A cross hair (+) in the upper
left corner indicates the exact location. Touch the cross hair (+) in the upper left
corner of the screen to initiate calibration. Another message, "Touch Upper Right +",
appears on the display. Touch the cross hair in the upper right corner. Another
message, "Touch Lower Right +", appears on the display. Touch the cross hair in the
lower right corner of the screen to return to the Main Menu.
NOTE:
When touching the screen during calibration, be as accurate as possible.
Diagnostics Menu
The
Diagnostics
button from the Main Menu should only be used under supervision
from a Crestron technical support representative during telephone support. Most of
the options available from the Diagnostics Menu, shown after this paragraph, are
numeric in nature and their interpretation is beyond the scope of this manual.
Diagnostics Menu
Setup Menu
To obtain the Setup Menu, shown after this paragraph, select the
Setup
button from
the Main Menu. Many touchpanel options (i.e., standby timeout, brightness, panel
tracking, and Ethernet) are available directly from the Setup Menu and are explained
in the following paragraphs. Other setup parameters (i.e., interface, RS-232, audio,
RGB, and video) use additional menus and are detailed in subsequent paragraphs as
well. After setup parameters have been set, select the
Return
button to return to the
Main Menu.
Operations Guide - DOC. 5825
15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L
•
11