manualshive.com logo in svg

Crestron Crestron Isys TPS 6000L, Operation Manual, Page: 17 / 52

Share
Download
Crestron Crestron Isys TPS 6000L Operation Manual Download Page 17

Crestron Isys™ 

TPS-6000L

 

 

15 Inch Lectern Touchpanel

 

NOTE:

  IP settings are necessary only if the TPS-ENETL is installed. Serially 

connect a PC to the TPS-6000L via the RS-232 connector and refer to the details in 
the latest revision of the TPS-ENETL (Doc. 5829).  

Selection of the 

Ethernet

 button from the Setup Menu displays details such as the IP 

Address, Subnet Mask, Def(ault) Router, IP Table, etc. For example, refer to a 
sample display shown after this paragraph. The settings can only be viewed from this 
screen. To enter commands to access/set all Ethernet configurations use the RS-232 
connector and refer to the information in the TPS-ENETL Installation & Operations 
Guide, as stated in the previous note.  

Sample Display from Ethernet Button Press 

 

Return  

Select the 

Return

 button, located at the lower right corner of the Setup Menu, after 

setup parameters have been set. 

Interface Menu 

The touchpanel communicates with a control system to activate other controls or to 
display feedback from components within the system. The communication interface 
must be correctly specified or communication will not occur. To set communication 
parameters select the 

Interface

 button located in the upper left corner of the Setup 

Menu and display the Interface Menu, shown after this paragraph.  

Interface Menu 

 

The Cresenet network identity number (CRESNET ID) is displayed at the bottom of 
the left-most column in the Interface Menu. CRESNET ID is the two-digit 
hexadecimal number represented by ## in the figure for illustrative purposes. The 

Operations Guide - DOC. 5825 

15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L  

•

  13 

Summary of Contents for Crestron Isys TPS 6000L





















































Reviews:

No comments