Crestron CNX-PVID8x4 Operation Manual Download Page 24 | Manualshive

Page: 24 / 44

background image

Professional Video Distribution Switch

Crestron

CNX-PVID8x4

20

•

Professional Video Distribution Switch: CNX-PVID8x4

Operations Guide - DOC. 8166A

Programming Software

Have a question or comment about Crestron software?

Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (www.crestron.com). To post your own question or
view questions you have submitted to Crestron’s True Blue Support, log in at

http://support.crestron.com

. First-time users will need to establish a user account.

Setup is easy thanks to Crestron’s Windows



-based programming software. The

Crestron Application Builder

™

(AppBuilder) creates a complete project, with no

special programming required. Crestron AppBuilder completes all necessary
programming for a base system including all touchpanel screens and the control
system program. Once Crestron AppBuilder creates the project, the system interfaces
and program logic can be customized. It can easily be modified with Crestron
development tools (i.e., SIMPL Windows and Crestron VisionTools

®

Pro-e (VT

Pro-e) software packages).

The program output of Crestron AppBuilder is a SIMPL Windows program with
much of the functionality encapsulated in macros. Therefore, extending the
capabilities of the system is very easy. Crestron AppBuilder and SIMPL Windows
are intended for users with different levels of programming knowledge. Crestron
AppBuilder is easier to use for the beginning programmer, and much faster for all
programmers. However, it does not allow the degree of control and flexibility that
SIMPL Windows does. Of course, one can initiate programming using the easiest
method (Crestron AppBuilder) and use advanced techniques that are available from
SIMPL Windows to customize the job.

Crestron AppBuilder comes with templates for all supported interfaces. If a user
wishes to create a touchpanel project using templates with a different look-and-feel,
this can be accomplished by making a custom template. This custom template can
then be used by Crestron AppBuilder to create the final project files to be loaded into
the panels. Alternatively, VT Pro-e can be used to tweak projects created with the
Crestron AppBuilder or develop original touchpanel screen designs.

Earliest Version Software Requirements for the PC

NOTE:

Crestron recommends that you use the latest software to take advantage of

the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website (www.crestron.com).

The following are recommended software version requirements for the PC:

•

(Optional) Crestron Application Builder version 1.2.5 or later. Requires
SIMPL Windows.

•

SIMPL Windows version 2.00 or later.
Requires SIMPL+ Cross Compiler version 1.1.

•

Crestron Database version 15.0 or later. Required by SIMPL Windows.

«
...
22
23
24
25
26
...
»

Summary of Contents for CNX-PVID8x4













































Reviews:

No comments

Related manuals for CNX-PVID8x4

Brand: Cisco Pages: 30

Brand: FAAC Pages: 2

Brand: Zektor Pages: 17

xStack DGS-3427

Brand: D-Link Pages: 246

Brand: Baxall Pages: 33

Brand: Intermatic Pages: 1

TradeSwitch2-USB

Brand: G&D Pages: 88

EXT-UHDA-HBTL-RX

Brand: Gefen Pages: 33

Brand: Wyrestorm Pages: 4

Storage Networking SAN128B-6

Brand: IBM Pages: 116

Brand: Versitron Pages: 46

Brand: Linkskey Pages: 2

VNLW-P-1001-MV-N-W

Brand: Greengate Pages: 2

Brand: MaxTech Pages: 10

Brand: Rasfox Pages: 13

Brand: Rose electronics Pages: 68

Brand: Vantron Pages: 29

Brand: 3onedata Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands