Crestron CNX-PVID8x4 Operation Manual Download Page 38

Page: 38 / 44

Professional Video Distribution Switch

Crestron

CNX-PVID8x4

•

Professional Video Distribution Switch: CNX-PVID8x4

Operations Guide - DOC. 8166A

File Transfer | Send Program Command

3. The “Send Program” window appears, as shown after this step. Click

Browse

, locate the compiled file (.spz for PRO2), and click

Open

. This

will display the program's header information and enable one or both of
the

What to Send

check boxes. If the program does not contain any

SIMPL+ modules, only the

SIMPL Program

check box will be enabled.

If it does contain SIMPL+ modules, then the

SIMPL+ Program(s)

check box will also be enabled. Select one or both check boxes and
then click

Send Program

to begin the transfer.

NOTE:

Refer to the respective Operations Guide for the control system for details

about the other fields shown on the “Send Program” window.

“Send Program” Window

4. To verify that the program has been transferred successfully, select

Diagnostics

Report Program Information

. This should display a

window that provides details about the current program loaded into the
control system.

Summary of Contents for CNX-PVID8x4













































Search results

Summary of Contents for CNX-PVID8x4

Reviews:

Related manuals for CNX-PVID8x4

Brands by name

Popular brands

Crestron CNX-PVID8x4, Operation Manual

Search results

Summary of Contents for CNX-PVID8x4

Reviews:

Related manuals for CNX-PVID8x4

Brands by name

Popular brands