Crestron
CNMSX
Integrated Control System
"Import an Archived Program" Dialog Box
The job may be copied to any folder or directory, and the User IR, Macro, and
SIMPL+ files will be copied to the proper directories. If a version of SIMPL
Windows lower than 1.30.01 is being used, copy the ZIP file into the job directory
stated in step 1, then extract the files with a program called WinZip. Obtain a copy of
this program from their website (
) on the internet. Extract the files
into the same directory where the archive was copied. Once files are extracted, retain
the original ZIP file in case the files need to be restored at any point. The User IR,
Macro, and SIMPL+ modules will need to be copied to their proper directories
manually.
File Types
There are quite a few file types involved with Crestron control software. This section
is intended to explain the different file types that might be encountered in each
directory. In many cases, the supplied software is grouped into a number of
subdirectories. The intent is to keep files organized. For example, after copying the
files to the hard disk, the directory structure
may
appear as shown below.
Possible Subdirectory Structure
NOTE:
In this structure, the "VT3501" and "VT3502" directories represent two VT-
3500 touchpanels that are part of the entire remote control system. Please consult the
Operations Guide - DOC. 8118B
Integrated Control System: CNMSX
•
21
