manualshive.com logo in svg

Crestron CNMSX-AV, Operation Manual

Share
Download
Crestron CNMSX-AV Operation Manual Download Page 12

Integrated Control System 

Crestron 

CNMSX

 

Menu Selection Buttons 

MENU

 

This menu selection button functions as a return and will eventually bring the screen 
display to the menu default state. 

 

This button scrolls the listed information UP. 

 

This button scrolls the listed information DOWN.  

BKLT 

This button adjusts the brightness of the LCD backlight and the front panel LEDs.  

Menu Function Buttons 

PANEL

 

This menu function button displays a programmable interface offering command text, 
indirect text, and hierarchical screen structure. The menu contents are subject to 
programming and an example of this display is provided in "Programming the LCD 
Display (available on CNMSX-PRO only)" on page 15.  

INFO 

This button displays a default Info Menu, shown below. System information, 
including the loaded SIMPL program version, types of CNX expansion cards 
installed in the card slots, the Cresnet devices detected, the Ops/ROM version, and the 
communication settings, is displayed.  

Default Info Menu 

 

MSG 

This button displays system error messages or alarms. If there are one or more errors, 
press the 

 

menu selection button to reveal the next message.  

NOTE:

  Error messages may be the result of hardware or software failure, hardware 

incompatibility with software definitions, or a programming error. After the last 
message has been read, the ERR front panel LED extinguishes.  

Example Message 

 

8  

•

  Integrated Control System:  CNMSX 

Operations Guide - DOC. 8118B 

Summary of Contents for CNMSX-AV













































Reviews:

No comments

Brands by name

Popular brands

Load more brands