
Mouse/Keyboard Controller
Crestron
CNMK
16
•
Mouse/Keyboard Controller: CNMK
Operations Guide - DOC. 5699A
2. As shown after this step, select
File Transfer | Send Program
(alternatively, press
Alt+P
) from the Viewport menu.
File Transfer | Send Program Command
3. The “Send Program” window appears, as shown after this step. Click
Browse
, locate the compiled file (.spz for PRO2), and click
Open
. This
will display the program's header information and enable one or both of
the
What to Send
check boxes. If the program does not contain any
SIMPL+ modules, only the
SIMPL Program
check box will be enabled.
If it does contain SIMPL+ modules, then the
SIMPL+ Program(s)
check box will also be enabled. Select one or both check boxes and
then click
Send Program
to begin the transfer.
NOTE:
Refer to the respective Operations Guide for the control system for details
about the other fields shown on the “Send Program” window.
“Send Program” Window
4. To verify that the program has been transferred successfully, select
Diagnostics
|
Report Program Information
. This should display a
window that provides details about the current program loaded into the
control system.
Firmware Upgrade
A firmware upgrade file has the
extension .upg
To take advantage of all the available features, it is important that the unit contains
the latest firmware. Please check the Crestron website for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the CNMK firmware, complete the following steps.
1. Make sure that “Communication Settings” that begins on page 13 has
been performed. Suggested baud rate is 38400.