
Crestron
CNMK
Mouse/Keyboard
Controller
Operations Guide – DOC. 5699A
Mouse/Keyboard Controller: CNMK
•
9
Power Up Sequence
The following procedures apply only in instances where the Cresnet configuration
includes a keyboard or mouse directly connected to the CNMK.
1. Regardless of the configuration, make all connections before applying
power.
2. Apply power to the CNMK and control system.
3. Apply power to the PC.
The CNMK initializes with the PC during the power up sequence. To ensure proper
initialization and operation, avoid doing any of the following:
•
Mouse movement during the power up sequence
•
Pressing any mouse buttons during the power up sequencer
To prevent damage to the CNMK mouse and keyboard ports, do not plug or unplug
any of the mouse and keyboard connectors to the CNMK while power is applied.
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE:
Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
The following are recommended software version requirements for the PC:
•
SIMPL Windows version 2.03 or later.
•
Crestron Database version 15.0.0 or later. Required by SIMPL
Windows.
Programming with SIMPL Windows
NOTE
: The following are acceptable file extensions for programs that include a
CNMK, developed for specific control system types:
.smw
projectname
.smw (source file)
.spz
projectname
.spz (compiled file for 2-Series)
.bin
projectname
.bin (compiled file for CNX generation)
.csz
projectname
.csz (compiled file for CNX generation with SIMPL+)
.ush
projectname
.ush (compiled file for CNX generation with SIMPL+
header
file)
.usp
projectname
.usp (source code module for SIMPL+)