Crestron
CHV-TSTAT and CHV-THSTAT
Thermostats
Fan Mode Screen
MODE
VIEW
T
T
Fan Mode
AUTO ON
2. Fan Mode
Pressing the
MODE
button again displays the “Fan Mode” screen.
Use the
up
▲
and
down
▼
arrow buttons to select AUTO or ON.
NOTE:
In
AUTO
, the fan runs only when the system calls for heat or cool.
In
ON
, the fan runs continuously.
Humidifier Screen
MODE
VIEW
T
T
Humidifier
ENABLED DISABLED
3. Humidifier
Pressing the
MODE
button displays the “Humidifier” screen. This screen
appears if enabled in setup and the thermostat is equipped with a humidity
sensor.
Use the
up
▲
and
down
▼
arrow buttons to select ENABLED or
DISABLED.
Crestron System Screen
MODE
VIEW
T
T
Crestron Sys
ONLINE HOLD
4. Crestron System
Pressing the
MODE
button again displays the “Crestron Sys” screen.
Use the
up
▲
and
down
▼
arrow buttons to select ONLINE or HOLD.
ONLINE – Data flows both ways, to and from the thermostat, enabling
adjustment from a remote location.
HOLD – Data flows one way, from the thermostat, blocking system
commands to change the temperature and humidity when you do
not want the current settings reset. Restores to the last command
sent when online is re-engaged.
Global Update Screen
MODE
VIEW
T
T
Global Update
SEND
5. Global Update
Pressing the
MODE
button again displays the “Global Update” screen.
Allows a single thermostat location to update the current temperature
settings to all other thermostats on the system, provided that this function has
been defined in the Crestron program.
Press the
down
▼
button to send the update.
Pressing the
MODE
button again returns you to the Main Screen
Operations and Installation Guide – DOC. 8163C
Thermostats: CHV-TSTAT and CHV-THSTAT
•
57