Crest Electronics CDVS-7000, User Manual, Page: 84 / 119

4-15
Relay Schedule
Relay schedule tells the system when to use the relays. This is useful when the user does not
need the system to send a signal to a device such as an alarm. For example, the user has motion
detection turned on and has linked a camera to a relay, but does not want to set off the alarm dur-
ing normal business hours. The user can tell the system to not send a signal during these hours.
There are two options for this window, use and not used . The system allows the user to set each
relay by day and hour, independent of the other relays. The image below shows the Relay sched-
ule window.
relay selection buttons
relay schedule grid
use or not used mode
Event Notification Schedule Setup Window
This window allows the user to set by day, hour, and event when to notify the remote client of an
emergency situation such as an alarm event. Using this schedule will prevent the user from get-
ting unwanted event notifications, such as during normal business hours. There are three events
the remote client can be notified of: Sensor, motion, and video loss. The user can choose any
combination of these.
camera selection
sensor event
motion event
camera loss