Crest Electronics CDVS-7000, User Manual, Page: 10 / 119

1-2
Camera Display Buttons
The following is a description of the different views available in the Crest CDVS-7000 series
DVR software.
This will allow the user to view only one camera at a time. To view a single camera, left click
highlighting the desired camera in a red outline. Next, left click the single camera display button.
The selected camera will replace the current view with a single camera view. To have the sys-
tem rotate from one camera to another, click the Next button. To have the system automatically
change from one camera to another, click the Auto Rotate button (see below).
4 Camera Display Button
This will allow the user to view four cameras at a time. The system displays the cameras in
the following configurations: cameras 1,2,3,4, cameras 5,6,7,8, cameras 9,10,11,12, cameras
13,14,15,16. To have the system rotate from one 4 camera view to another, click the Next but-
ton. To have the system automatically change from one 4 camera view to another, click the Auto
Rotate button (see below).
6 Camera Display Button
This will allow the user to display six cameras at a time. The different configurations are: camer-
as 1 - 6, 7 - 12, and 11 - 16. To view, click on one of the cameras you want to view and click the
6 camera display button. To have the system rotate from one 6 camera view to another, click the
Next button. To have the system automatically change from one 6 camera view to another, click
the Auto Rotate button (see below).
9 Camera Display Button
This will allow the user to display nine cameras at a time. The different configurations are:
cameras 1 - 9, and 8 - 16. To view, click on one of the cameras you want to view and click the 9
camera display button. To have the system rotate from one 9 camera view to another, click the
Next button. To have the system automatically change from one 9 camera view to another, click
the Auto Rotate button (see below).
Single Camera Display Button