Crest Electronics CDVS-7000, User Manual, Page: 74 / 119

4-5
Sensor Setup
The sensor setup menu is used to set up the sensors on the DVR. The number of sensors activat-
ed on screen depends on the model DVR you have. This section deals only with the DVR setup
for the sensors. See the Installation guide for the physical connecting of a sensor to the DVR. To
set up sensors on your system, click the sensor button. The following window appears.
copy to all copy to selected
sensor number
sensor name
sensor to
camera link
selected camera
selected relay
sensor to
relay link
use check box
sensor type
apply
Sensor Type
Type of alarm sensor used: NO (normally open) or NC (normally closed)
Use Check Box
The use check box tells the system if the sensor is used or not. To use a sensor, click the sensor
number you want to use and click the use check box.
Sensor to Camera Link
This screen is a display telling the user what cameras are associated with each sensor. It is not
very practical, but it is possible to have all cameras associated with one sensor or have all cam-
eras associated with all sensors. To associate a camera with a sensor, follow these steps:
1). Click the sensor to link to a camera; it will highlight in white indicating it is selected.
2). Click the camera or cameras you want associated with the selected sensor. Each camera
selected will highlight in white and the sensor to camera link screen will display your links. X =
not linked O = linked.
Call Preset with
sensor