Crest Electronics CDVS-7000, User Manual, Page: 71 / 119

4-2
Use Camera check box
Check this box for each camera input used.
Note: Some models of the CDVS-7300 series will display jumpy video both in live and play-
back mode if this check box is checked and there is no camera connected to the port.
Pop Up check box
Check this box if you want the selected camera to pop up full screen when motion or sensor
alarm is detected. The channel will stay full screen until there is another motion, alarm detection,
or the user changes the screen mode display.
Camera Selection
Click the camera input number to be set up. Any settings you make on this screen will apply to
this camera only. If you want to make different settings to another camera, select it and make
changes. If all cameras are to be set up the same, please read Copy to All and Copy to Selected
below.
Copy to All
If all cameras are to be set up the same then set up one camera and click Copy to All . This will
apply the current settings to all camera channels.
Note: Some models of the CDVS-7300 series
will display jumpy video both in live and playback mode if this check box is checked and there
is no camera connected to the port.
Copy to Selected
Use copy to selected when you need to copy the current setting to some, but not all the cameras.
To use the
copy to selected
function, make changes to one camera, then with this camera still se-
lected, hold down the control button (Ctrl) on the keyboard and click the other cameras needing
the same setup. After selecting the necessary cameras click the
Copy on Selected
button.
Note:
Some models of the CDVS-7300 series will display jumpy video both in live and playback mode
if this check box is checked and there is no camera connected to the port.
Secret Camera
Check this box if you want the camera hidden. At this time the camera will be hidden from all
users including the administrator. The administrator will however be able to see the hidden cam-
era with the use of the remote software.
Recording Resolution
Each camera can be set for the following resolutions individually.
CDVS-7500 SERIES
CIF(LOW) 320X240
2CIF(MIDDLE) 720X240
VGA(HIGH) 720X480
CDVS-7300 SERIES
CIF(LOW) 320X240
2CIF(MIDDLE) 640X240
VGA(HIGH) 640X480