-33-
CDVS-5400 SERIES DVR
5.9 Pre-Alarm Recording
Records previous image from when sensor & motion detected. Max 1
minute setting is available. If you set 5 seconds, it records images from 5
seconds before when sensor & motion detected.
- When index searching, this data marked with ‘P’ letter. And ‘Pre-Alarm’
message shows up.
5.10 Sensor Connection
Check sensor you will use with current camera.
5.11 Motion Setting
Choose how system warns you when motion detects.
- Beep on Detect : Make ‘Beep’ sound through inner pc speaker.
- Full Screen Pop up : Shows full screen of detected camera for a while.
- Alarm Output : Operate connected alarm.
- Sensitivity : Set sensitivity of motion detection.(Low 5-High 50)
- Clear Motion Area : Clear all the motion area of current camera.
5.12 Camera Information
Set the name of camera and adjust bright, hue, contrast.
- Name : Type the name to be displayed on screen.
- Bright : Adjust bright with using +, - buttons.
- Hue : Adjust Hue with using +, - buttons.
- Contrast : Adjust contrast with using +, - buttons.
- Adjust Default : set current camera as default information.
- Adjust All Default : set all cameras as default information.
Summary of Contents for CDVS-5400 SERIES
Page 1: ......
